A woven basket pattern with a concealed twist-off drip tray.

This modern wall planter features a concealed, removable drip tray that helps keep your wall clean and your watering routine simple. Use it with a suitably sized nursery pot or plant directly in the planting chamber. It is 3D printed to order in PLA, a plant-derived bioplastic.

The planter slides onto a compatible LoftedGoods wall attachment. Depending on the attachment selected, it can be installed with appropriately rated removable picture-hanging strips or screws. The wall attachment and installation hardware are sold separately.

💧 How to water

Slide the planter off the wall attachment, remove the drip tray, and water in the sink. Allow excess water to drain through the drainage holes, refit the tray, and slide the planter back onto the attachment. The tray catches residual drips after watering.

Small dimensions
Overall width: 3.12″ (79.3 mm)
Overall depth: 3.50″ (88.9 mm)
Overall height: 3.31″ (84.0 mm)

Measurements are the model envelope (X × Y × Z), not inner-pot or nursery-pot capacity.